FC200 ECU programmer is designed for ECU/ EGS clones. Supports data processing, ISN read and write, disassembly matching, VIN modification, and DTC shielding, etc.
CG FC200 Highlights:
1. Supports 4200 ECUs/EGS, covers 80% of models in the market.
2. Read BM ISN Code by OBD, perfectly replaces CG AT200
3. Original from CGDI and free Update Online for 1 year, subscription is $250/ year
4. Multi-Language: English
5. Bosch search: Free to find out the ECU type
6. 3 Operation modes: With CAN-bus, No disassembly (platform mode), and Boot mode
7. Full Version with All License Activated, No extra charge. Software version: V1.1.1.0
8. Supports key programming with CGDI BM, VVDI 2 Full, Mini ACDP, AUTEL IM508, IM608 Pro, etc.
9. Supports connection by Bench, Boot, OBD
10. Calculates checksum online
11. Supports GM E38 E39 E67 ECU, ZF 9HP Gearbox etc
Notice:
If boot, bench and gm license are not activated, provide serial number to us to activate for free.
FC200 Software Free Download Link, please download here when you get the package.
Here is User Manual for your reference too.
V1.1.1.0 Software
(2023.02.01)
1.Setup interface adds-Server Selection function
2.Optimize the device activation interface (add the “Activate” prompt)
3.Repair the failure problem of the Bosch query abroad
4.Added GM AcDelco transmission platform mode: GM 6T30/35/40/45/50, GM 6T70/75/80, GM 6L45/50/80/90
5.New BOOT mode of BOSCH ST10 engine: ME7.1.1, ME7.5.10, ME7.8.2, and MED 7.6.2
6.New BOSCH TC17 engine platform mode: ME17 TC1728 (China)
7.New BOOT mode of KEFICO TC17 engine: CPGDSH2.2x.x, CPGDSH1.26.1, KME 1.9.3.1
8.New BOSCH VAG gearbox PFLASH calibration function: DQ200 TC1784, DQ200 TC1766, DQ250 TC1766, DL501Gen1 TC1766, VL381 TC1766
9.Newly modified VIN model: MED 17.8.3
Note: The equipment produced before 2021.09.10 will be automatically activated, and the service time will be valid until 2022.09.10. For equipment produced after this time, after the software is updated, a pop-up window will prompt to activate. Only after activation, some functions related to the server can be used normally. The validity period starts from the day of activation, and the validity period is one year.
CG FC200 ECU Programmer Functions
1. Original Parts Protection
More than 98% of ECUs and EGS support seat mode and OBD mode, no need to open the cover and drill holes to protect the original car. FC200 not only supports BM ECU but also supports over 3000 ECUs like KTAG + Kess, Kessy, Dimsport, etc.
Check FC200 Support ECU List
2. Intelligent Recognition
The “Identification” function can help users to better diagnose whether the ECU is communicating and check whether the wiring is faulty.
If the ECU module can communicate without damage and the wiring is correct, the identification can be successful, and the chip information, hardware information, and firmware information can be read.
3. Module Clone
Supports ECU data reading, writing, module cloning, no synchronization matching, no online programming, subregional data burning, automatic verification, maximum protection for chips and modules.
4. Read & Write ISN
Supports all BM series (including Mini) ECU ISN code acquisition, convenient for all keys lost matching and anti-theft fault maintenance. Quickly solve the problem for data collection of BM all key lost.
5. Write VIN
Solve the problem of vehicle VIN or VIN mismatch, which is convenient for vehicle maintenance.
6. Data Processing
Supports data analysis and modification for the 4th and 5th generations of Audi/Seat/Skoda/Volkswagen ECUs
Turn off anti-theft system for Bosch MED/EDC17 series ECU
TPROT off function of Bosch VAG MEDC17 series, /Mini MEVD17/EDC17 series, Hyundai/Kia EDC17/MED(G)17 series.
Packing List
1pc x CGDI FC200 host
1pc x OBD cable
1pc x Jumper
1pc x USB cable
6pcs x G-type adapter cable
3pcs x F-type adapter cable
6pcs x E-type adapter cable
6pcs x D-type adapter cable
6pcs x C-type adapter cable
6pcs x B-type adapter cable
Reviews
There are no reviews yet.